Services Provided By Third Chakra Solar Solutions

---

• Pre-Removal Documentation
  Label and document all panels, conductors, and components to ensure accurate reinstallation and system mapping.
   
• Safe Equipment Removal
  Detach all modules, rails, and electronics using manufacturer-approved tools to prevent microfractures or connector damage.
   
• Wiring Preservation
  Cleanly disconnect circuits, weather-seal exposed ends, and secure wiring to protect against corrosion or physical damage during construction.
   
• Inspection of Existing Issues
  • Identify and correct poor workmanship, loose hardware, or NEC/code violations from previous installations before reinstalling equipment.
   
• Contractor Coordination
   Communicate directly with roofers or general contractors to schedule around tear-off and reinstallation, avoiding delays or misalignment.
   
• Code-Compliant Reinstallation
   Reinstall equipment per NEC, AHJ, and manufacturer specs—including conductor sizing, torque specs, grounding, and junction box standards.
   
• System Recommissioning
   Reconnect to inverter monitoring platforms (Enphase, SolarEdge, Tesla, FranklinWH), confirm communication, and update serials if necessary.
   
• Roof Protection Standards
   Flash and seal all penetrations with roofing-grade materials, preserving roof integrity and maintaining roofing manufacturer warranties.
   
• Performance Testing
   Perform a complete inspection and system test to confirm correct wiring, grounding, and monitoring—verify voltage, amperage, and inverter output.
   
• Two-Year Workmanship Warranty
   Back all detach and reattach work with a two-year labor warranty, ensuring peace of mind and long-term system performance.

• System Diagnosis
  Identify underperforming panels, detect inverter or optimizer faults, and analyze monitoring data for production issues or historical inconsistencies.

• Component Repair
  Replace failed microinverters, optimizers, or wiring, and restore monitoring connections and racking integrity using code-compliant methods.

• Wiring & Connection Corrections
  Rewire compromised circuits, secure loose conductors, and reseal damaged penetrations caused by poor past workmanship.

• Preventive Maintenance
  Clean solar panels using soft tools and purified water, reapply critter guards, and verify system voltage and current across strings and inverters.

• Annual Performance Inspection
  Conduct a full inspection with digital documentation and provide a report outlining system health, safety, and recommended follow-up services.

• System Design & Load Analysis
  We assess your cooling needs and energy usage to size an A/C unit powered primarily by solar energy, minimizing grid reliance.
   
• Low-Panel Count, High-Efficiency Setup
  Our systems use advanced inverter A/C units that require fewer solar panels than traditional setups. making them ideal for homes with limited roof space or budget-conscious upgrades.
   
• Integrated Solar + A/C Installation
  We handle everything from solar panel placement to HVAC installation and electrical integration all in one seamless project.
   
• Battery-Optional Configurations
  Whether you are grid-tied, off-grid, or looking to add storage later, we build systems that can evolve with your needs.
   
• Code-Compliant & Permit-Ready
  All installations meet NEC and local codes, and we handle permitting and inspections for a hassle-free experience.
   
• Cut Cooling Costs by 40–100%
  Offset a major portion, or all of your A/C costs during daylight hours.
   
• Smaller Solar Footprint
  Efficient A/C units mean fewer panels, less roof space, and lower upfront costs.
   
• Increased Comfort, Lower Stress
  Run your A/C during peak hours without fear of spiking your bill.
   
• Boost Property Value
  Homes with energy-efficient upgrades and solar systems command higher resale value and market appeal.
   
• Eco-Friendly Cooling
  Reduce your carbon footprint with every cooled room, powered by the sun.

• Custom System Sizing & Design
  We evaluate your pool’s surface area, exposure, and your ideal swim season to determine the optimal number of panels for maximum heating efficiency.
   
• Professional Installation
  Our certified team installs the panels on your roof or a ground-mounted array with proper tilt, spacing, and plumbing to ensure strong flow and heat absorption.
   
• Plumbing & Control Integration
  We connect the system directly to your existing pool pump and filtration setup, adding a manual or automated control valve for easy temperature management.
   
• Inspection & Permitting
  We ensure all solar pool heating installs meet code, pass inspection, and come backed by trusted warranties.
   
• Maintenance & Winterization
  We offer seasonal system checks, panel flushing, and winter prep to keep your investment running strong for years.
   
• Free Heat from the Sun
  Eliminate or reduce gas and electric pool heating costs, solar pool heaters typically pay for themselves in 2–4 years.
   
• Extended Swim Season
  Enjoy warm water from March through October (or longer), even in early spring and late fall.
   
• Low Maintenance, Long Life
  With no moving parts in the panels, solar pool heaters are incredibly reliable and can last 15–20 years with minimal upkeep.
   
• Eco-Friendly Recreation
  Heat your pool without emissions, just clean, renewable energy.
   
• Increased Property Value
  A solar-heated pool is a highly marketable upgrade that enhances your home’s appeal and usability.

• Whole System & Load Readiness Audit
  Evaluate solar production, energy usage patterns, and load priorities to recommend proper battery sizing and backup design.

• Backup Strategy Consultation
  • Work with the homeowner to determine whether whole-home or partial (essential load) backup is best based on lifestyle, grid reliability, and budget.

• Whole-Home Backup Design
  Design battery systems that support the entire home during outages, requiring advanced load control and full panel review.

• Partial Backup Design
  Configure battery storage to power selected critical loads like lights, refrigeration, and medical circuits for efficient, targeted support.

• Structural & Mounting Location Assessment
  Inspect interior or exterior installation sites for secure anchoring, code-compliant clearance, and proper ventilation.

• Electrical Panel & Load Center Review
  Assess panel capacity, busbar limits, and backup compatibility to ensure a safe and functional battery integration.

• Code Compliance Inspection
  Verify all conduit, grounding, disconnects, and labels meet NEC and local AHJ requirements for safe operation.

• Inverter & Energy Control Configuration
  Install and program battery-ready inverters to manage charging, discharging, and seamless transitions between grid and backup.

• Battery Reserve Programming
  Configure storage settings for emergency backup, time-of-use optimization, and self-consumption based on homeowner priorities.

• Monitoring Platform Setup
  Enable user access to live performance data through apps like Tesla, Enphase, mySolarEdge, or FranklinWH, including system alerts.

• Warranty & Manufacturer Compliance
  Ensure all install methods follow brand specifications to preserve product warranties and meet inspection standards.

• Fire Safety & Local Code Clearance
  Confirm battery placement follows setback and fire-resistance guidelines, maintaining distance from windows and living spaces.

• Licensed & Insured in the State of Texas
  Fully compliant with state regulations and coverage — no risk, no red tape.
   
• Certified by Top Manufacturers
  Tesla, Enphase, SolarEdge, FranklinWH, LG, AET, NABCEP, and more — ensuring system compatibility and warranty protection.
   
• 15+ Years of Industry Experience
  From residential rooftops to commercial projects, we’ve seen it all and solved it all.
   
• Reliable, Code-Compliant Installs
  Every project is completed to meet or exceed NEC, AHJ, and manufacturer standards.
   
• Flexible Workforce with Professional Accountability
  We adapt to your timelines and document every step — from layout to final inspection.
   
• Excellent Communication & Post-Install Support
  We don’t disappear after install day. We provide clear reporting and rapid issue resolution.
   
• Transparent Pricing with No Corners Cut
  We offer fair, scope-based pricing without sacrificing craftsmanship.
   
• Respect for Your Brand & Your Customer
  We treat your clients as our own, helping preserve your company’s reputation through every handshake and rooftop.

 .

• Site Assessment & Preparation
  We begin with a full visual inspection for panel damage or discoloration, assess accessibility, and shut down the system safely if required.
   
• Debris Removal & Surface Cleaning
  All loose debris—including leaves, pollen, and bird droppings—is removed by hand or blower. We rinse with deionized water and gently scrub panels using solar-safe tools. Biodegradable soap is used only when needed.
   
• Equipment and Frame Detailing
  We thoroughly clean around panel frames, mounting clamps, conduit runs, and junction boxes to maintain system integrity and performance.
   
• Performance & Safety Check
  Drainage, shading, and system alignment are verified. When available, we check performance via the monitoring platform and document all work with before-and-after photos.
   
• Customer Reporting & Recommendations
  A digital summary of our findings, improvements, and service suggestions is delivered promptly, along with tailored recommendations for your next cleaning interval.

•  Full System Performance Audit
  Evaluate current energy production vs. expected output
   
• Structural Inspection of Mounting Hardware
  Check for proper rafter anchoring, flashing, and roof penetrations
   
• Electrical Safety & Code Compliance Review
  Inspect disconnects, conduit runs, junction boxes, and breaker sizing per NEC standards
   
• Inverter & Optimizer Operation Check
  Ensure all power electronics are functioning, communicating, and properly configured
   
• Monitoring Platform Setup & Verification
  Ensure customer and installer access to real-time data and alerts
   
• Labeling & System Mapping Verification
  Confirm accurate layout for string design, identification, and reconnection accuracy
   
• Roof Condition Assessment (pre/post solar)
  Identify roof wear or damage from previous solar installs to assist roofers and insurance claims
   
• Warranty Protection Compliance Check
  Ensure installation methods match manufacturer and finance company warranty terms
   
• Detailed Digital Report with Photos
  Professional documentation of findings, issues, and recommendations provided within 24–48 hours

• Covers Labor and Parts Others Won’t
  Extend protection beyond manufacturer limitations by including certified labor, diagnostics, and repair, even if your original installer is no longer in business.

• Protects Your Investment Long-Term
   Safeguard your 25+ year solar investment with long-term coverage that maintains system health, performance, and home resale value.

• Certified Repair Partners Step In
  Receive service from vetted, licensed technicians who follow manufacturer specs, ensuring safe, warranty-compliant repairs without shortcuts.

• Keeps Monitoring and Safety Systems in Check
   Maintain full visibility and safety by covering critical components like inverters, wiring, and monitoring systems under extended protection.

• No Unexpected Bills After a Power Drop
   Avoid costly surprises when equipment fails, your extended warranty covers the fix, even if your original solar provider is out of the picture.